椰子油自动灌装线

描述

model YX-30G coconut oil filling line automatic bottles feeding sterilizer tunnel UV 2 heads pneumatic filling

caps manual feeding capping vertical round jars labeller machinery the line includes the machine as below:

►model NPACK-BS12 round turntable bottles feeding system

►model NAPCK-UT01 UV sterilizer tunnel

►Model NPACK-FM02 Two heads pneumatic filling machine automatic with sensor system

►Model NPACK-MC100 Glass jars capping machine with manual feeding

►Model NPACK-630A vertical round bottles labeling machines

For the wholes line here the machines are listed one by one with detailed description from the lines as

follow:

1.model NPACK-BS12 round turntable bottles feeding system

The Unscrambler is the driving force with frequency control table, put the bottle of artificial circular turntable, turntable rotation,

will be transferred to the bottle conveyor belt has continued into the filling line for filling. Easy to use, you easily done with the bottle Unscrambler work.

Features of bottle unscrambler
1) Suitable for unscrambling disordered polyester bottles
2) Aligns bottles and discharges them by vacuum conveyor
3) PLC program controlled
4) Automatic.
5) High speed operation

Technical parameters of bottle unscrambler

Diameter: Φ1000mm Speed: 430-50bottles/min(with Speed Controller, Schneider Inverter)

* Power: AC 220V±5% 50Hz 120W Material: SUS304

* Motor: Wanxin(Taiwan Brand, reducer without maintain) Variable Speed Controller: Taida

* Machine Weight: 80Kg Bottle Diameter Ø20~Ø100 mm

2.model NAPCK-UT01 UV sterilizer tunnel

This machine is mainly used in the pharmaceutical industry for ampoules,oral liquid bottles and vial bottles,glass bottles sterilizing.

This machine complete the whole procedure of bottle feeding, preheationg sterilizing, cooling and bottle outleting automatically

Use the laminar flow principle and hot air high-speed disinfection technology, which can make the container in the sealed tunnel achieve the national cleanliness class A standard,

is currently the most popular , best drying and sterilizing deffect equipment, even heat distribution and good depyrogenating.

The unit can be used as a single machineor be combined into a production line with the front bottle washing machine and the behind filling machine.

Parameter of Ultraviolet sterilizing tunnel

1.Max bottle high :320mm
2.Max roducts width : 400mm
3. UV bottle diameter : 12-24mm
4. Conveyor speed:0~10m/min ;
6.UV lamp power:4KW
7. UV Drying products speed:1800~3000PCS/HR
8.Total power:5KW
9..Machine dimension: L:1800mm W:600mm H:1700mm

3.Model NPACK-FM02 Two heads pneumatic filling machine automatic with sensor system

The single (double) head automatic ointment filling machine adopts programmable logic controller (PLC) human and machine interface technology,

equipped with imported photoelectric trackswitch from Korea, which is suitable for filling ointment products in the industries such as ointment, oil products, syrup,

shampoo, bechamel and fruit juice etc. The filling nozzle will be automatically insertedinto the bottle to carry out the filling and then rapidly ascend, which can reduce the air bubbles.

The product integrates electric and pneumatic functions into one, with reasonable design, stable performance,

accurate quantity, glass table surface, automatic bottle feeding, steady operation without noise, electrics peed control to the filling speed and filling volume and convenient maintenance and cleaning.

The new typefilling equipment is the best choice for the realization of automatic production.

Characteristics of automatic filling machines

1.外形美观新颖，结构紧凑。
2，整机主行程采用气动控制。灌装采用踏板控制，操作调整方便省力。
3，整机配有油箱，工作台和底部滑轮等，造型美观，操作方便。
4.停止时不滴水。
5.与材料接触的所有部件，屏蔽壳和台板均采用SUS316L不锈钢制成。
6，采用气动控制，操作维护方便。安装行程指示器，测量准确，无级调速。
7.稳定可靠的操作。

Basic parameter of 2 heads filling machines

Filling heads : 2 nozzles

Filling Speed：10-30bpm

Filling Precision：≦±1﹪

Supply power：380V 50Hz

Current：3A

Power：500W

Air pressure：0.4－0.6Mpa

Filling volume：5-100ml、10-280ml、20-500ml、100-1000ml、500-2000ml、1000-5000ml、1000-10000ml

3.hair conditioner bottle capping machine automatic single head capper requipment:

1) The capping machine is designed to achieve the rationalized production objectives. Capping procedure adopts automated control, easy operation, fast production speed and excellent sealing effect (material for PE, PP, PS, PVE, and PET). Capping position is unified, beautiful and neat.

2) Suitable for round containers of pharmaceutical, chemical, food and other industries to cap covers. The machine has equipped with self-test functions- detection of power stability, over-current, over-voltage, over-temperature control protection and phase locking.

Features of the hair conditioner bottle capping machine

1) Power of this machine is adjustable; working status can be displayed in the control panel.

2) This machine adopts disk location on the design of the bottle for clearance campaign, through two sets of magnetic torque Rotary scarf on the orientation of the bottle cap.

3) This machine is an ideal equipment, which caps bottle cover in pharmaceutical, pesticide, daily chemical and food industry, etc.
4) Note: this can also be used for rolling aluminum cover, theft - proof cover and screw cap.

Main Technical Parameters of the hair conditioner bottle capping machine

Basic parameter of model NPACK-MC100 capping machine glass jars:

Model No. NPACK-MC100
Applicable for Crown cap
Applicable bottle height 60-380mm
Applicable bottle neck diameter 16-50mm
Motor voltage 220v(customize)
Motor power 0.37kw
Production capacity 1200-1500bottles/hour
Machine size 600*210*900mm
Packing Wooden carton
Machine weight 90kg
Adjusting Capping machine will be adjusted as your bottle and cap before shipment

Configuration of model NPACK-AC60 Single head capping machine automatic:

4.Model NAPCK-630A vertical round bottles labeling machines

basic use of model YX-630AA labeling machine automatic vertical labeller machinery with bottles feeding table

The whole weekses that can used for various cylinder form product|half week, just the back double mark sticks a mark, such as sticking of food can, cosmetics circle bottle, and medicine bottle...etc. mark;Take a dozen of code machines such as the another nuance, can carry out to stick a mark to print to produce informations like batch number,etc at the same time.

►applicable scope:

*Apply label:The not dry gum label doesn't do a gum film, the electronics takes charge of code, the form code wait;

*Apply a product:The product that requests to stick to attach label or film on the circumference noodles, conic surface;

*Applied profession:Extensively Be applied to a food, medicine, cosmetics and day to turn, electronics, hardware, plastics etc. profession;

*Is applied solid example:The PET circle bottle sticks a mark, the plastics bottle sticks a mark, food can etc..

►Basic parameter of model YX-630AA labeling machinery automatic with bottles feeding system

*model NPACK-630AA

*Stick to mark accuracy:±1 mm;(do not contain a product, label error margin)

*Stick to mark speed:Is 20~60|minute;(have relation with product label size)

*Apply product size:￠ 30 the ≤ product diameter ≤￠ 100 mms;

*Apply label size:15 ≤ width ≤ 110 mmses, length ≥ 20 mms;

*The whole machine size:1800 ×s 900 ×s 1300 mmses;(long × breadth × Height)

*Apply the power:220 Vs 50|60 Hzs;

*Air pressure:0.2~0.5 Mpas;

*The whole machine weight:2950 kgs.

Feeding tables basic data as below:

Applicable specifications: 20-1000 ml

bottle diameter: φ 10-phi 80 mm

the bottle height: 85-300 mm

production capacity: 0-100 BPM (speed adjustable)

voltage: 220 v50hz

power: 0.5 kw

weight: 70 KG

shape size: 1100 * 1000 * 1300 mm

Working process from A to Z for labeling machinery

Put wine bottle →the bottle boxs off→The bottle examines

The air cylinder positions→ Stick a mark and reply a mark →The label examines→The air cylinder resets

→The product sends out→Circulate with this

1,The bottle gets into belt conveyer from the left side;

2,The cent bottle organization reduces transporting of slow work piece speed and lets the of work piece draw back a distance, for sticking of follow-up mark assurance time;

3,The work piece gets into examination district and examines a work piece and stretches out to suppress a work piece while positioning cylinder to postpone;

4,After positioning a work piece, time after enactment, lead electrical engineering to turn to send out label, revolve to reply a mark at the same time;

5,After sticking good label, position air cylinder to send back, the work piece leaves to stick to mark position with the belt conveyer;

6,The top end divides a bottle of organization to put a bottle-

According to up circulate to stick a mark in a row.

Final product as samples from filling line automatic